/* --Sparse Optical Flow Demo Program--
 * Written by David Stavens (david.stavens@ai.stanford.edu)
 */
#include <stdio.h>
#include <cv.h>
#include <highgui.h>
#include <math.h>

static const double pi = 3.14159265358979323846;

inline static double square(int a)
{
	return a * a;
}

/* This is just an inline that allocates images.  I did this to reduce clutter in the
 * actual computer vision algorithmic code.  Basically it allocates the requested image
 * unless that image is already non-NULL.  It always leaves a non-NULL image as-is even
 * if that image's size, depth, and/or channels are different than the request.
 */
inline static void allocateOnDemand( IplImage **img, CvSize size, int depth, int channels )
{
	if ( *img != NULL )	return;

	*img = cvCreateImage( size, depth, channels );
	if ( *img == NULL )
	{
		fprintf(stderr, "Error: Couldn't allocate image.  Out of memory?\n");
		exit(-1);
	}
}

int main(void)
{
	/* Create an object that decodes the input video stream. */
	CvCapture *input_video = cvCaptureFromFile(
		"C:\\Documents and Settings\\David Stavens\\Desktop\\223B-Demo\\optical_flow_input.avi"
		);
	if (input_video == NULL)
	{
		/* Either the video didn't exist OR it uses a codec OpenCV
		 * doesn't support.
		 */
		fprintf(stderr, "Error: Can't open video.\n");
		return -1;
	}

	/* Read the video's frame size out of the AVI. */
	CvSize frame_size;
	frame_size.height =
		(int) cvGetCaptureProperty( input_video, CV_CAP_PROP_FRAME_HEIGHT );
	frame_size.width =
		(int) cvGetCaptureProperty( input_video, CV_CAP_PROP_FRAME_WIDTH );

	/* Determine the number of frames in the AVI. */
	long number_of_frames;
	/* Go to the end of the AVI (ie: the fraction is "1") */
	cvSetCaptureProperty( input_video, CV_CAP_PROP_POS_AVI_RATIO, 1. );
	/* Now that we're at the end, read the AVI position in frames */
	number_of_frames = (int) cvGetCaptureProperty( input_video, CV_CAP_PROP_POS_FRAMES );
	/* Return to the beginning */
	cvSetCaptureProperty( input_video, CV_CAP_PROP_POS_FRAMES, 0. );

	/* Create a windows called "Optical Flow" for visualizing the output.
	 * Have the window automatically change its size to match the output.
	 */
	cvNamedWindow("Optical Flow", CV_WINDOW_AUTOSIZE);

	long current_frame = 0;
	while(true)
	{
		static IplImage *frame = NULL, *frame1 = NULL, *frame1_1C = NULL, *frame2_1C = NULL, *eig_image = NULL, *temp_image = NULL, *pyramid1 = NULL, *pyramid2 = NULL;

		/* Go to the frame we want.  Important if multiple frames are queried in
		 * the loop which they of course are for optical flow.  Note that the very
		 * first call to this is actually not needed. (Because the correct position
		 * is set outsite the for() loop.)
		 */
		cvSetCaptureProperty( input_video, CV_CAP_PROP_POS_FRAMES, current_frame );

		/* Get the next frame of the video.
		 * IMPORTANT!  cvQueryFrame() always returns a pointer to the _same_
		 * memory location.  So successive calls:
		 * frame1 = cvQueryFrame();
		 * frame2 = cvQueryFrame();
		 * frame3 = cvQueryFrame();
		 * will result in (frame1 == frame2 && frame2 == frame3) being true.
		 * The solution is to make a copy of the cvQueryFrame() output.
		 */
		frame = cvQueryFrame( input_video );
		if (frame == NULL)
		{
			/* Why did we get a NULL frame?  We shouldn't be at the end. */
			fprintf(stderr, "Error: Hmm. The end came sooner than we thought.\n");
			return -1;
		}
		/* Allocate another image if not already allocated.
		 * Image has ONE channel of color (ie: monochrome) with 8-bit "color" depth.
		 * This is the image format OpenCV algorithms actually operate on (mostly).
		 */
		allocateOnDemand( &frame1_1C, frame_size, IPL_DEPTH_8U, 1 );
		/* Convert whatever the AVI image format is into OpenCV's preferred format.
		 * AND flip the image vertically.  Flip is a shameless hack.  OpenCV reads
		 * in AVIs upside-down by default.  (No comment :-))
		 */
		cvConvertImage(frame, frame1_1C, CV_CVTIMG_FLIP);

		/* We'll make a full color backup of this frame so that we can draw on it.
		 * (It's not the best idea to draw on the static memory space of cvQueryFrame().)
		 */
		allocateOnDemand( &frame1, frame_size, IPL_DEPTH_8U, 3 );
		cvConvertImage(frame, frame1, CV_CVTIMG_FLIP);

		/* Get the second frame of video.  Same principles as the first. */
		frame = cvQueryFrame( input_video );
		if (frame == NULL)
		{
			fprintf(stderr, "Error: Hmm. The end came sooner than we thought.\n");
			return -1;
		}
		allocateOnDemand( &frame2_1C, frame_size, IPL_DEPTH_8U, 1 );
		cvConvertImage(frame, frame2_1C, CV_CVTIMG_FLIP);

		/* Shi and Tomasi Feature Tracking! */

		/* Preparation: Allocate the necessary storage. */
		allocateOnDemand( &eig_image, frame_size, IPL_DEPTH_32F, 1 );
		allocateOnDemand( &temp_image, frame_size, IPL_DEPTH_32F, 1 );

		/* Preparation: This array will contain the features found in frame 1. */
		CvPoint2D32f frame1_features[400];

		/* Preparation: BEFORE the function call this variable is the array size
		 * (or the maximum number of features to find).  AFTER the function call
		 * this variable is the number of features actually found.
		 */
		int number_of_features;
		
		/* I'm hardcoding this at 400.  But you should make this a #define so that you can
		 * change the number of features you use for an accuracy/speed tradeoff analysis.
		 */
		number_of_features = 400;

		/* Actually run the Shi and Tomasi algorithm!!
		 * "frame1_1C" is the input image.
		 * "eig_image" and "temp_image" are just workspace for the algorithm.
		 * The first ".01" specifies the minimum quality of the features (based on the eigenvalues).
		 * The second ".01" specifies the minimum Euclidean distance between features.
		 * "NULL" means use the entire input image.  You could point to a part of the image.
		 * WHEN THE ALGORITHM RETURNS:
		 * "frame1_features" will contain the feature points.
		 * "number_of_features" will be set to a value <= 400 indicating the number of feature points found.
		 */
		cvGoodFeaturesToTrack(frame1_1C, eig_image, temp_image, frame1_features, &number_of_features, .01, .01, NULL);

		/* Pyramidal Lucas Kanade Optical Flow! */

		/* This array will contain the locations of the points from frame 1 in frame 2. */
		CvPoint2D32f frame2_features[400];

		/* The i-th element of this array will be non-zero if and only if the i-th feature of
		 * frame 1 was found in frame 2.
		 */
		char optical_flow_found_feature[400];

		/* The i-th element of this array is the error in the optical flow for the i-th feature
		 * of frame1 as found in frame 2.  If the i-th feature was not found (see the array above)
		 * I think the i-th entry in this array is undefined.
		 */
		float optical_flow_feature_error[400];

		/* This is the window size to use to avoid the aperture problem (see slide "Optical Flow: Overview"). */
		CvSize optical_flow_window = cvSize(3,3);
		
		/* This termination criteria tells the algorithm to stop when it has either done 20 iterations or when
		 * epsilon is better than .3.  You can play with these parameters for speed vs. accuracy but these values
		 * work pretty well in many situations.
		 */
		CvTermCriteria optical_flow_termination_criteria
			= cvTermCriteria( CV_TERMCRIT_ITER | CV_TERMCRIT_EPS, 20, .3 );

		/* This is some workspace for the algorithm.
		 * (The algorithm actually carves the image into pyramids of different resolutions.)
		 */
		allocateOnDemand( &pyramid1, frame_size, IPL_DEPTH_8U, 1 );
		allocateOnDemand( &pyramid2, frame_size, IPL_DEPTH_8U, 1 );

		/* Actually run Pyramidal Lucas Kanade Optical Flow!!
		 * "frame1_1C" is the first frame with the known features.
		 * "frame2_1C" is the second frame where we want to find the first frame's features.
		 * "pyramid1" and "pyramid2" are workspace for the algorithm.
		 * "frame1_features" are the features from the first frame.
		 * "frame2_features" is the (outputted) locations of those features in the second frame.
		 * "number_of_features" is the number of features in the frame1_features array.
		 * "optical_flow_window" is the size of the window to use to avoid the aperture problem.
		 * "5" is the maximum number of pyramids to use.  0 would be just one level.
		 * "optical_flow_found_feature" is as described above (non-zero iff feature found by the flow).
		 * "optical_flow_feature_error" is as described above (error in the flow for this feature).
		 * "optical_flow_termination_criteria" is as described above (how long the algorithm should look).
		 * "0" means disable enhancements.  (For example, the second array isn't pre-initialized with guesses.)
		 */
		cvCalcOpticalFlowPyrLK(frame1_1C, frame2_1C, pyramid1, pyramid2, frame1_features, frame2_features, number_of_features, optical_flow_window, 5, optical_flow_found_feature, optical_flow_feature_error, optical_flow_termination_criteria, 0 );
		
		/* For fun (and debugging :)), let's draw the flow field. */
		for(int i = 0; i < number_of_features; i++)
		{
			/* If Pyramidal Lucas Kanade didn't really find the feature, skip it. */
			if ( optical_flow_found_feature[i] == 0 )	continue;

			int line_thickness;				line_thickness = 1;
			/* CV_RGB(red, green, blue) is the red, green, and blue components
			 * of the color you want, each out of 255.
			 */	
			CvScalar line_color;			line_color = CV_RGB(255,0,0);
	
			/* Let's make the flow field look nice with arrows. */

			/* The arrows will be a bit too short for a nice visualization because of the high framerate
			 * (ie: there's not much motion between the frames).  So let's lengthen them by a factor of 3.
			 */
			CvPoint p,q;
			p.x = (int) frame1_features[i].x;
			p.y = (int) frame1_features[i].y;
			q.x = (int) frame2_features[i].x;
			q.y = (int) frame2_features[i].y;

			double angle;		angle = atan2( (double) p.y - q.y, (double) p.x - q.x );
			double hypotenuse;	hypotenuse = sqrt( square(p.y - q.y) + square(p.x - q.x) );

			/* Here we lengthen the arrow by a factor of three. */
			q.x = (int) (p.x - 3 * hypotenuse * cos(angle));
			q.y = (int) (p.y - 3 * hypotenuse * sin(angle));

			/* Now we draw the main line of the arrow. */
			/* "frame1" is the frame to draw on.
			 * "p" is the point where the line begins.
			 * "q" is the point where the line stops.
			 * "CV_AA" means antialiased drawing.
			 * "0" means no fractional bits in the center cooridinate or radius.
			 */
			cvLine( frame1, p, q, line_color, line_thickness, CV_AA, 0 );
			/* Now draw the tips of the arrow.  I do some scaling so that the
			 * tips look proportional to the main line of the arrow.
			 */			
			p.x = (int) (q.x + 9 * cos(angle + pi / 4));
			p.y = (int) (q.y + 9 * sin(angle + pi / 4));
			cvLine( frame1, p, q, line_color, line_thickness, CV_AA, 0 );
			p.x = (int) (q.x + 9 * cos(angle - pi / 4));
			p.y = (int) (q.y + 9 * sin(angle - pi / 4));
			cvLine( frame1, p, q, line_color, line_thickness, CV_AA, 0 );
		}
		/* Now display the image we drew on.  Recall that "Optical Flow" is the name of
		 * the window we created above.
		 */
		cvShowImage("Optical Flow", frame1);
		/* And wait for the user to press a key (so the user has time to look at the image).
		 * If the argument is 0 then it waits forever otherwise it waits that number of milliseconds.
		 * The return value is the key the user pressed.
		 */
		int key_pressed;
		key_pressed = cvWaitKey(0);

		/* If the users pushes "b" or "B" go back one frame.
		 * Otherwise go forward one frame.
		 */
		if (key_pressed == 'b' || key_pressed == 'B')	current_frame--;
		else											current_frame++;
		/* Don't run past the front/end of the AVI. */
		if (current_frame < 0)						current_frame = 0;
		if (current_frame >= number_of_frames - 1)	current_frame = number_of_frames - 2;
	}
}
